The dovetail which uses the sliding of metal plates for its contact method is made up of a trapezoid dovetail and dovetail surface slider, and the deviation is adjusted by a set screw on the sides. The dovetail slider is the most basic and simple type and some of its strengths are that it has a high load capacity, high hardness, it is vibration resistance, long deviation, and is low cost; goniometer stages are part of this type. However, the drawback is that precision is low due to friction. It uses a rack & pinion for its drive, and it is perfect for simple positioning or quick movement. After it is mounted, turning the handle while holding the top plate may cause deviation or damages.

Specification / Model	D2-44	D2-46	D2-48	D2-410
Knob Position	Center	Center	Center	Center
Stage Surface (mm)	40 X 40	40 X 60	40 X 80	40 X 100
Stroke (mm)	± 10	± 20	± 30	± 40
Resolution (mm)	0.1 / Vernier	0.1 / Vernier	0.1 / Vernier	0.1 / Vernier
Parallelism (mm)	0.06	0.06	0.06	0.06
Straightness (mm)	0.03	0.03	0.03	0.03
Travel Guide	Surface to Surface / Rack & Pinion	Surface to Surface / Rack & Pinion	Surface to Surface / Rack & Pinion	Surface to Surface / Rack & Pinion
Material	Aluminum	Aluminum	Aluminum	Aluminum
Load Capacity (kg/f)	2.8	3.8	3.8	3.8
Weight (kg)	0.5	0.62	0.8	0.94

Specification / Model	D2-412	D2-414
Knob Position	Center	Center
Stage Surface (mm)	40 X 120	40 X 140
Stroke (mm)	± 50	± 60
Resolution (mm)	0.1 / Vernier	0.1 / Vernier
Parallelism (mm)	0.06	0.06
Straightness (mm)	0.03	0.03
Travel Guide	Surface to Surface / Rack & Pinion	Surface to Surface / Rack & Pinion
Material	Aluminum	Aluminum
Load Capacity (kg/f)	3.8	3.8
Weight (kg)	0.98	1.1

[D2 Series] Dovetail XY-Stages

Available Options